replaced pictures for fan box #133
Conversation
|
|
||
| | Weather Guard | ||
| | P-TET-000143 | ||
| | 1 | ||
| | PLA/PETG | ||
| | No | ||
| | https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000159%20Stealth%20Filter%20Frame%20Sanyo.stl | ||
| | https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000159%20Stealth%20Filter%20Frame%20Sanyo.stl[STL] |
There was a problem hiding this comment.
This is not the weather gard, but it's the filter frame. https://github.com/tetrabiodistributed/papr-print-files/blob/main/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000143%20Weather%20Guard.stl (but the permalink) is correct
| @@ -43,77 +43,77 @@ These parts should be printed at 0.2 or 0.15 spacing. They should be oriented s | |||
| | 1 | |||
| | PLA/PETG | |||
| | No (Can have some in the nut pocket) | |||
| | https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000140%20Base%20Sanyo.st | |||
| | https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000140%20Base%20Sanyo.st[STL] | |||
There was a problem hiding this comment.
Link should end with .stl
There was a problem hiding this comment.
@Venkat4real this link needs to fixing still
| @@ -167,22 +167,22 @@ These are components that need to be purchased. Prices fluctuate, and so are no | |||
| | Count | Description | URL | Number in Package | |||
| | 1 | |||
| | Sanyo Denki 9BMB12F201 | |||
| | https://octopart.com/9bmb12f201-sanyo+denki-24320259 | |||
| | https://octopart.com/9bmb12f201-sanyo+denki-24320259[Link] | |||
There was a problem hiding this comment.
Maybe link to the main electronics BOM? I don't think this is the right fan, but maybe it is. I thought it ended with 202 not 201
|
@Venkat4real looks like there's a few fixes needed, but once addressed this can be merged. |
| @@ -43,77 +43,77 @@ These parts should be printed at 0.2 or 0.15 spacing. They should be oriented s | |||
| | 1 | |||
| | PLA/PETG | |||
| | No (Can have some in the nut pocket) | |||
| | https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000140%20Base%20Sanyo.st | |||
| | https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000140%20Base%20Sanyo.st[STL] | |||
There was a problem hiding this comment.
@Venkat4real this link needs to fixing still
| | 1 | ||
|
|
||
| | 1 | ||
| |Stealth Filters | ||
| |https://www.amazon.com/STEALTH-Respirator-Filters-Woodworking-Replacement/dp/B09H52LGGW[Stealth Filters] | ||
| |https://www.amazon.com/STEALTH-Respirator-Filters-Woodworking-Replacement/dp/B09H52LGGW[link] |
There was a problem hiding this comment.
Maybe make [Link] (capitalized "L") for consistency
|
Closing this PR because the changes are made in the last PR. |
Continuation of #125